Stainless Hose Fittings has achieved international recognition for providing high quality and custom made fittings to a wide range of market sectors and industries.
Our in-house fabrication department is composed of highly trained professionals equipped with the latest processing and welding equipment.
|
| |
| EXAMPLE #1 |
Description: The threads were removed from the Lifesaver and the MJIC was removed from the Flange Adapter before being welded together.
Parts Used: Lifesaver, 1704 MJIC Code 61 Flange 90° Adapter
Finished Product: SHF43-20-20FL90
| #1: |
Before/after picture of the Lifesaver. You can see where the threads have been machined off and counterbored. |
| #2: |
Before/after picture of the 1704 MJIC Code 61 90° Flange Adapter. The Male JIC and threads have been removed. |
| #3: |
Assembled before being welded |
| #4: |
Assembled and welded, this is the finished product. |
|
|
|
| |
| EXAMPLE #2 |
Description: A Female JIC Weld-On and a 2403 Male JIC x Male JIC Adapter were used in this job. The Weld-On's HEX O.D. was machined down to a specific O.D.. One end of the 2403 Male JIC x Male JIC Adapter was machined off at the HEX then counterbored to accept the Female JIC Weld-On.
Parts Used: SHFWO-FJ, 2403 MJIC x MJIC
Finished Product: Adapter 6402 - MORB x FJIC Swivel
| #1: |
Both the SHFWO-FJ Weld-On and a 2403 MJIC x MJIC Adapter before any custom work performed. |
| #2: |
Assembled before being welded, you can see where the Weld-On was machined down to a specific O.D., and the 2403 Adapter was machined off at the HEX. |
| #3: |
Assembled and welded, this is the finished product. |
|
|
|
| EXAMPLE #3 |
Description: 2 Weld-On's were used in this example. A Male Pipe and a Female JIC. The Female JIC was machined down to a specific O.D.. The Male Pipe was bored to a specific I.D.
Parts Used: SHFWO-12MP, SHFWO-10FJ
Finished Product: Adapter 6505 - MP x FJIC Swivel
| #1: |
Both fittings before machine work |
| #2: |
Both fittings after machine work. The Male Pipe was bored to a specific I.D. and the Female JIC was machined to a specific O.D. |
| #3: |
Both fittings assembled after machine work but before weld. |
| #4: |
Picture of both fittings after being welded, this is the completed product. |
|
|
|
| EXAMPLE #4 |
Description: In this example, an adapter 5405-4-6 was machined to accept a SHFHY Series MP. The MP was machined off before assembly and weld. The goal was to create an SHFHY-06-06FP (Female Pipe)
Parts Used: SHFHY-06-06MP, 5405-4-6
Finished Product: SHFHY-06-06FP
| #1: |
5405-4-6, left side is before machining, right is after threads were machined off. |
| #2: |
The SHFHY-06-06MP before the MP was machined off on left. Right side is after MP was machined and counterbored. |
| #3: |
This is a picture of the customized fittings assembled together before being welded. |
| #4: |
This is the finished product after being welded. |
|
|
|
| EXAMPLE #5 |
Description: The customer needed a BW Series Male O-Ring Boss in this example. An SHFBW-16-16MP was used along with an 0402-16 to create the finished product. The threads and hex were machined off of the SHFBW-16-16MP to fit the I.D. of the 0402-16 adapter.
Parts Used: SHFBW-16-16MP, 0402-16
Finished Product: SHFBW-16-16RA
| #1: |
Pictures of both fittings before any custom work performed |
| #2: |
After threads were removed from the SHFBW-16-16MP and assembled with the adapter before being welded |
| #3: |
This is the finished product after being welded. |
|
|
|
